Try it with a roomba

"Lights out robotics" is hard. Try it with a roomba!

Comments

Post a Comment

Popular posts from this blog

GPT-3.5 Link 16 Interops

 Describe in detail the US link 16 military communications network interoperability with other military networks in four paragraphs at the level of a Phd. Paragraph 1: The US Link 16 military communications network is a secure, high speed data link that enables the exchange of tactical information between participating forces. It is based on the JREAP (Joint Range Extension Application Protocol) protocol and is used by the US, NATO, and other allied nations. It provides real-time voice, video, text, and data transmission services over long distances. Link 16 also supports a variety of interoperable networks such as SADL (Secure Air Defense Link), TACDS (Tactical Data System), IBS (Integrated Broadcast Service) and MIDS-LVT (Multifunctional Information Distribution System - Low Volume Terminal). Paragraph 2: Link 16 interoperability with other military networks allows for secure communication between different platforms. This includes platforms such as ground based systems, aircraft...
Read more

GPT-3.5 Arduino Mega Link 16 proposal

Image
 Describe in detail an arduino Mega board CAT5 interface with the US link 16 military communications network at the level of a Phd. The Arduino Mega board CAT5 interface with the US Link 16 military communications network would involve a number of different steps. Firstly, the Arduino Mega board would need to be configured correctly in order to communicate with the Link 16 network. This would include setting up the correct baud rate, data bits and parity settings as well as enabling any additional serial ports and/or UART interfaces that may be necessary for communication.  Once configured, the Arduino Mega board would need to interface with an appropriate transceiver module that is capable of communicating on the Link 16 frequency band. This transceiver module will need to be connected to the Arduino’s I/O pins in order for it to send and receive data from the Link 16 network.  The next step is to write a program on the Arduino which will allow it to understand and parse...
Read more